No aircraft takes off until a licensed engineer signs it off. B1 is the DGCA licence category for the mechanical side of that job: the airframe, the engines and the systems that keep them running. Our AME programme runs for two years plus practical training. Ground classes are at our Dwarka centre in New Delhi, and the course prepares you for the DGCA module exams and for the hangar floor.
AME Mechanical (B1.1 / B1.2) Course
Course details are as provided by the institute and may change by batch. Confirm them with a counsellor before you enrol.
B1 is the mechanical branch of the DGCA aircraft maintenance engineer (AME) licence. Under CAR-66, a B1 holder can release an aircraft to service after maintenance on its structure, engines and mechanical and electrical systems, for the aircraft types endorsed on the licence. That signature is the legal moment an aircraft is declared fit to fly.
It is a licence, not a degree.
The course trains you for it; DGCA grants it.
Both are mechanical categories. The difference is the engine type you are licensed to work on.
Jets and turboprops, the aircraft most airlines and cargo operators fly.
Piston-engine aeroplanes, typically smaller aircraft used for training and general aviation.
The syllabus follows the CAR-66 knowledge areas for B1.
| AREA | KNOWLEDGE AREA | WHAT IT COVERS |
|---|---|---|
| 01 | Aircraft structures and systems | How an airframe is built and works: flight controls, hydraulics, landing gear, pneumatics, fuel and air conditioning. You learn to read a fault, fix it and record it properly. |
| 02 | Engines and propellers | How gas turbine engines work and how they are inspected, plus propellers for turboprops. Piston engines are covered under B1.2. |
| 03 | Maintenance practices, materials and hardware | Tools, torque, safety wiring, corrosion, measurement and the paperwork behind every job. |
| 04 | Aerodynamics, electrical and electronic fundamentals | The science that links every system. A mechanical engineer still reads circuits and wiring diagrams. |
| 05 | Human factors and aviation law | Why maintenance errors happen, how to prevent them, and the DGCA rules you will work under. |
The programme runs for two years plus practical training. Ground classes are held at our Dwarka centre in New Delhi.
Schedules can change by batch, so confirm the current plan with a counsellor before you enrol.
DGCA’s exam instruction 05/2019 allows up to three consecutive attempts at a paper. After that, you wait a year before another set of three. You can apply for one licence category per session and up to five papers within it. Check DGCA’s latest notice before planning your attempts.
For the full process, read our guide on how to get an aircraft maintenance engineer licence in India.
These criteria are as provided by the institute. Final eligibility is confirmed at counselling.
Fees vary by batch, and payment plans are available on request. A counsellor will share the exact figure.
Want the wider picture first? See aircraft maintenance course eligibility, fees and BSc options in India.
| AME Mechanical (B1.1 / B1.2) | AME Avionics (B2) | |
|---|---|---|
| You enjoy | Engines, hydraulics, structures | Circuits, sensors, navigation systems |
| You work on | Airframe, engines, mechanical systems | Electrical, instrument, navigation and communication systems |
| A typical task | Inspect, replace and test mechanical components | Trace and fix faults in electrical and electronic systems |
| Next step | You are here | Explore AME Avionics (B2) |
Choose with care. DGCA’s 2019 exam instruction lets a B2 candidate move to one mechanical category, but it does not allow the reverse. Not sure which fits you? Talk to us before you decide, or compare every stream on the AME courses page.
Licensed engineers keep fleets flying, so the work sits wherever aircraft are maintained:
Placement help is part of the programme: career guidance, resume preparation and interview support. It is help, not a guarantee. Your licence, endorsements and experience decide how far you rise.
Curious about the job itself? Read what aircraft maintenance engineers do daily.
Looking at other options? See all courses, including Cabin Crew as well.
Call or WhatsApp +91 881 053 3156, or email office@visioninstituteofaviation.com. Visit us at F-647, Palam Extn., Sector 7, Dwarka, New Delhi 110075.
Course details, eligibility and admission criteria are as provided by Vision Institute of Aviation and may vary by batch. Licences are issued by DGCA after module exams and the required experience. Completing the course does not guarantee a licence, placement or employment.